Lower-Limb Exoskeleton for Joe McTigue: Embedded Systems and Electrical Engineering
Lower-Limb Exoskeleton for Joe McTigue: Embedded Systems and Electrical Engineering
About the project
Our wearable robotics laboratory is designing an ankle, knee, and hip exoskeleton for Joe McTigue. Joe has a spinal cord injury at the T4–T5 level, so he has no sensation or trunk control from the chest down. You will help design the first prototype of a lower-limb exoskeleton that combines passive components (e.g., springs) with electric motors to help Joe stand up, sit down, and walk on level ground.
What you will do and why it matters
- Design the battery management system. Joe will wear the exoskeleton for about 2 hours per day, so it needs a battery system that keeps Joe safe (protection against overcharging, overcurrent, and overheating) and tells him how much charge is left.
- Develop the embedded system (a Raspberry Pi and an STM32 microcontroller that communicate with the motor drivers). The embedded system reads the sensors and commands the motors in real time so that the motors and springs work together to assist each movement.
Time commitment
About 9 hours per week (3 research credits). These hours include:
- Weekly 30-minute meetings with the design team: Edgar Bolívar-Nieto (Assistant Professor, AME), Minho Lee (third-year PhD student), and Alexa Haenel (MFA student in Design).
- Monthly 30-minute meetings with Joe McTigue.
- Optional weekly 30-minute lab group meetings.
Who should apply
Juniors or seniors in Electrical Engineering or Computer Engineering.
Name of research group, project, or lab
Wearable Robotics Laboratory
Website
Why join this research group or lab?
Please visit our website to check ongoing research and approach